Boiler replacement in Bedford

A fair price from an installer we have checked. See the price for your home in about 60 seconds.

Get my guide price

Free, 60 seconds, no obligation.

Claymation: a homeowner with a cup of tea and her white cat, beside an engineer giving a thumbs up in front of her new boiler

QuoteMy Approved installers in Bedford

Every one has had their Gas Safe registration and insurance checked by us.

What a new boiler costs in Bedford

Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.

JobFromUp to
Baxi 400 Combi boiler, from £2,350 fittedReplace a combi with a new combiFrom the Baxi 400 Combi
£2,350£4,000
Ideal Logic+ Heat boiler, from £2,800 fittedReplace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat
£2,800£3,100
Baxi 400 Combi boiler, from £3,650 fittedSwitch from a tank system to a combiFrom the Baxi 400 Combi
£3,650£5,300
Baxi 400 Combi boiler, from £4,050 fittedReplace a back boiler with a combiFrom the Baxi 400 Combi
£4,050£5,700

Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.

See the price for my home
Claymation: a van pulling up outside a brick house, the homeowner waving from her front door

Homes in Bedford

Most homes in Bedford heat with mains gas, so the usual job here is a like for like gas boiler replacement.

The most common homes here are semi-detached (32%), then flats (29%).

Most homes here have two or three bedrooms (64%), the size a combi usually suits; with two bathrooms or more, a system boiler and a hot water cylinder often works better.

Homes39,373
Heated by mains gas74%
Electric heating only14%
Oil0%
Semi-detached32%
Terraced21%
Detached18%
Flats29%
1 or 2 bedrooms41%
3 bedrooms41%
4 or more bedrooms18%

Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Brickhill, Castle, Cauldwell, De Parys, Goldington, Harpur, Kempston Central and East, Kempston North, Kempston South, Kingsbrook, Putnoe, Queens Park.

Claymation: a homeowner looking up at a boiler flue on the outside wall of her house

A new boiler in Bedford: what is different here

A Town Centre conservation area was first designated in Bedford in 1969 with two adjoining areas, two more followed in 1970, and in 1975 the council joined all five into the single Bedford conservation area, last changed in 1992. It holds 114 listed buildings and four scheduled ancient monuments.

Bedford Borough Council has two Article 4 directions: one on houses in multiple occupation in the urban areas of Bedford and Kempston, in force since November 2020, and one made in 1987 for the Stewartby conservation area. The council's guide for the Bedford conservation area says that where an Article 4 direction is in force you must get planning permission for the works it controls, and that on a listed building works of alteration, outside and inside, may require consent.

Bedford's biggest growth followed the Midland railway of 1873: between 1851 and 1902 house building was rapid, estates of middle class and workers' housing grew around the older core and the population trebled from 11,693 to 35,144. The 15th century St Paul's Church in St Paul's Square, its spire rebuilt in 1868, is listed Grade I.

Flues, conservation areas and listed homes

In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.

On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.

Planning questions: Bedford Borough Council: do I need planning permission?.

Sources: Bedford Borough Council: householder developments in conservation areas · Bedford Borough Council: Article 4 directions · Bedford Borough Council: Bedford conservation area character appraisal (2008) · Bedford Borough Council: Bedford conservation area, maintaining and repairing your historic building (2010) · Historic England list entry 1321436: Church of St Paul, Bedford · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)

Neighbourhoods we cover in Bedford

Postcodes: MK40 MK41 MK42

How QuoteMy works

  1. Claymation: a homeowner with a cup of tea, checking her guide price on her phone
    See your price

    Answer a few questions about your home and see a guide price in about 60 seconds.

  2. Claymation: a white cat beside a phone that says You've been matched
    Ask for quotes if you want them

    Your details stay with us until you ask.

  3. Claymation: an engineer showing a homeowner his Gas Safe ID card at her kitchen table
    A checked installer calls

    A QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.

Questions

Do I need planning permission for a new boiler flue in Bedford?

Not for a like for like swap through the existing flue. Bedford Borough Council's own list of householder works in conservation areas says chimneys, flues or soil pipes on either a principal elevation or a side elevation fronting a highway need planning permission, and that all development needs planning permission if your property is a flat. On a listed building a new flue needs listed building consent: the council says works of alteration to a listed building, outside and inside, may require consent. Check with Bedford Borough Council before work starts.

How much does a new boiler cost in Bedford?

On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.

Who will contact me?

Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.

Does the installer have to be Gas Safe registered?

Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.