Boiler replacement in Bexley

A fair price from an installer we have checked. See the price for your home in about 60 seconds.

Get my guide price

Free, 60 seconds, no obligation.

Claymation: a homeowner with a cup of tea and her white cat, beside an engineer giving a thumbs up in front of her new boiler

QuoteMy Approved installers in Bexley

Every one has had their Gas Safe registration and insurance checked by us.

What a new boiler costs in Bexley

Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.

JobFromUp to
Baxi 400 Combi boiler, from £2,350 fittedReplace a combi with a new combiFrom the Baxi 400 Combi
£2,350£4,000
Ideal Logic+ Heat boiler, from £2,800 fittedReplace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat
£2,800£3,100
Baxi 400 Combi boiler, from £3,650 fittedSwitch from a tank system to a combiFrom the Baxi 400 Combi
£3,650£5,300
Baxi 400 Combi boiler, from £4,050 fittedReplace a back boiler with a combiFrom the Baxi 400 Combi
£4,050£5,700

Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.

See the price for my home
Claymation: a van pulling up outside a brick house, the homeowner waving from her front door

Homes in Bexley

Most homes in Bexley heat with mains gas, so the usual job here is a like for like gas boiler replacement.

The most common homes here are semi-detached (44%), then flats (25%).

Most homes here have two or three bedrooms (69%), the size a combi usually suits; with two bathrooms or more, a system boiler and a hot water cylinder often works better.

Homes95,303
Heated by mains gas79%
Electric heating only9%
Oil0%
Semi-detached44%
Terraced24%
Detached7%
Flats25%
1 or 2 bedrooms36%
3 bedrooms43%
4 or more bedrooms21%

Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Barnehurst, Belvedere, Bexleyheath, Blackfen & Lamorbey, Blendon & Penhill, Crayford, Crook Log, East Wickham, Erith, Falconwood & Welling, Longlands, Northumberland Heath, Sidcup, Slade Green & Northend, St Mary's & St James, Thamesmead East, West Heath.

Claymation: a homeowner looking up at a boiler flue on the outside wall of her house

A new boiler in Bexley: what is different here

Bexley has 23 conservation areas and over 150 listed buildings on the National Heritage List for England. Old Bexley, the village around Bexley High Street and North Cray Road, was designated on 17 February 1971 and extended on 11 November 1987.

Article 4(2) directions apply in the Brook Street, Old Bexley, Old Forge Way and Red House Lane conservation areas: in Old Bexley they cover numbered properties on North Cray Road and Bexley High Street and bring minor alterations such as attic rooms, windows, rendering and roofing materials under council control. The Old Bexley management plan says heating system flues and vents should be kept to a minimum and installed where they will not harm the appearance or character of the building or area.

The railway opened through Bexley in 1866, and with its electrification in 1926 came a boom of suburban house building: the council says Bexley village marks the edge of the spread of suburbia. Hall Place, built by the Champneis family with a 16th century north half, is listed Grade I.

Flues, conservation areas and listed homes

In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.

On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.

Planning questions: Bexley Council: how to apply for planning permission.

Sources: Bexley Council: Article 4 directions (the four conservation area directions) · Bexley Council: Old Bexley conservation area appraisal and management plan (February 2009) · Bexley Council: Old Bexley conservation area Article 4(2) directions · Bexley Council: Design Guide SPD part 2, building alterations and extensions (June 2026) · Historic England list entry 1188277: Hall Place, Bexley · Planning Portal: flue, chimney or soil and vent pipe, planning permission · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)

Neighbourhoods we cover in Bexley

Postcodes: DA5 DA6 DA7 DA8 DA14 DA15 DA16 DA17 DA18

How QuoteMy works

  1. Claymation: a homeowner with a cup of tea, checking her guide price on her phone
    See your price

    Answer a few questions about your home and see a guide price in about 60 seconds.

  2. Claymation: a white cat beside a phone that says You've been matched
    Ask for quotes if you want them

    Your details stay with us until you ask.

  3. Claymation: an engineer showing a homeowner his Gas Safe ID card at her kitchen table
    A checked installer calls

    A QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.

Questions

Do I need planning permission for a new boiler flue in Bexley?

Not for a like for like swap through the existing flue. In one of Bexley's 23 conservation areas a new flue on the front of the house, or on a side wall facing the road, needs planning permission: the Old Bexley plan says heating system flues and vents should be kept to a minimum and sited where they will not harm the appearance or character of the building or area, and the Article 4(2) directions in Brook Street, Old Bexley, Old Forge Way and Red House Lane further restrict what can be done there without planning permission. On a listed building a new flue needs listed building consent: Bexley says almost all works to a listed building need it and few are allowed as permitted development. Check with Bexley Council before work starts.

How much does a new boiler cost in Bexley?

On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.

Who will contact me?

Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.

Does the installer have to be Gas Safe registered?

Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.