QuoteMy Approved installers in Havering
Every one has had their Gas Safe registration and insurance checked by us.
What a new boiler costs in Havering
Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.
| Job | From | Up to |
|---|---|---|
Replace a combi with a new combiFrom the Baxi 400 Combi | £2,350 | £4,000 |
Replace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat | £2,800 | £3,100 |
Switch from a tank system to a combiFrom the Baxi 400 Combi | £3,650 | £5,300 |
Replace a back boiler with a combiFrom the Baxi 400 Combi | £4,050 | £5,700 |
Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.
See the price for my home
Homes in Havering
Most homes in Havering heat with mains gas, so the usual job here is a like for like gas boiler replacement.
The most common homes here are semi-detached (41%), then terraced (24%).
Most homes here have two or three bedrooms (70%), the size a combi usually suits; with two bathrooms or more, a system boiler and a hot water cylinder often works better.
| Homes | 101,272 |
|---|---|
| Heated by mains gas | 81% |
| Electric heating only | 7% |
| Oil | 0% |
| Semi-detached | 41% |
| Terraced | 24% |
| Detached | 11% |
| Flats | 23% |
| 1 or 2 bedrooms | 33% |
| 3 bedrooms | 47% |
| 4 or more bedrooms | 20% |
Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Beam Park, Cranham, Elm Park, Emerson Park, Gooshays, Hacton, Harold Wood, Havering-atte-Bower, Heaton, Hylands & Harrow Lodge, Marshalls & Rise Park, Mawneys, Rainham & Wennington, Rush Green & Crowlands, South Hornchurch, Squirrels Heath, St Alban's, St Andrew's, St Edward's, Upminster.

A new boiler in Havering: what is different here
Havering has 11 conservation areas. Cranham, Havering-atte-Bower, Rainham and Romford were designated in 1968, Gidea Park in 1970 (extended in 1989 to include the railway station), and the newest, Langtons and St Andrews in Hornchurch, in 2010.
Since 31 December 2015 an Article 4 direction has covered houses in the Gidea Park conservation area: it removes permitted development for the enlargement, improvement or other alteration of a house and for other alterations to its roof on the front and sides (the rear too in some streets), along with porches, hard surfaces, gates, fences, walls and exterior painting. Havering says listing does not freeze a building in time, but listed building consent must be applied for in order to make any changes.
Garden suburbs emerged at Upminster, Emerson Park and Gidea Park, Collier Row was built in the 1930s and the Harold Hill estate was completed in 1958, with 58,550 homes built in the borough since 1945. Upminster Windmill on St Mary's Lane, a tall octagonal smock mill, timber framed on a brick base, is listed Grade II*.
Flues, conservation areas and listed homes
In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.
On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.
Planning questions: Havering Council: do I need planning permission?.
Sources: Havering Council: Havering's 11 conservation areas · Havering Council: Gidea Park conservation area Article 4 direction notice (2015) · Havering Council: listed buildings · Havering Council: Havering character study, final report (2024) · Historic England list entry 1079878: Upminster Windmill · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)
Neighbourhoods we cover in Havering
Beam Park · Cranham · Elm Park · Emerson Park · Gooshays · Hacton · Harold Wood · Havering-atte-Bower · Heaton · Hylands & Harrow Lodge · Marshalls & Rise Park · Mawneys · Rainham & Wennington · Rush Green & Crowlands · South Hornchurch · Squirrels Heath · St Alban's · St Andrew's · St Edward's · Upminster
Postcodes: RM1 RM2 RM3 RM5 RM7 RM11 RM12 RM13 RM14
How QuoteMy works
See your priceAnswer a few questions about your home and see a guide price in about 60 seconds.
Ask for quotes if you want themYour details stay with us until you ask.
A checked installer callsA QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.
What a new boiler costs · Combi or system? · Checking a Gas Safe engineer
Questions
Do I need planning permission for a new boiler flue in Havering?
Not for a like for like swap through the existing flue. Havering points homeowners to the Planning Portal to find out whether a project needs permission. In one of the borough's 11 conservation areas a new flue on the front of the house, or on a side wall facing the road, needs planning permission, and in Gidea Park the Article 4 direction already removes permitted development for alterations to the front and sides of a house. On a listed building a new flue needs listed building consent: Havering says consent must be applied for in order to make any changes. Check with Havering Council before work starts.
How much does a new boiler cost in Havering?
On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.
Who will contact me?
Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.
Does the installer have to be Gas Safe registered?
Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.


