Boiler replacement in Hillingdon

A fair price from an installer we have checked. See the price for your home in about 60 seconds.

Get my guide price

Free, 60 seconds, no obligation.

Claymation: a homeowner with a cup of tea and her white cat, beside an engineer giving a thumbs up in front of her new boiler

QuoteMy Approved installers in Hillingdon

Every one has had their Gas Safe registration and insurance checked by us.

What a new boiler costs in Hillingdon

Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.

JobFromUp to
Baxi 400 Combi boiler, from £2,350 fittedReplace a combi with a new combiFrom the Baxi 400 Combi
£2,350£4,000
Ideal Logic+ Heat boiler, from £2,800 fittedReplace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat
£2,800£3,100
Baxi 400 Combi boiler, from £3,650 fittedSwitch from a tank system to a combiFrom the Baxi 400 Combi
£3,650£5,300
Baxi 400 Combi boiler, from £4,050 fittedReplace a back boiler with a combiFrom the Baxi 400 Combi
£4,050£5,700

Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.

See the price for my home
Claymation: a van pulling up outside a brick house, the homeowner waving from her front door

Homes in Hillingdon

Most homes in Hillingdon heat with mains gas, so the usual job here is a like for like gas boiler replacement.

With 31% of homes being flats, compact combi boilers are common: they need no tank and fit a kitchen cupboard.

Homes109,227
Heated by mains gas76%
Electric heating only11%
Oil0%
Semi-detached35%
Terraced20%
Detached14%
Flats31%
1 or 2 bedrooms43%
3 bedrooms38%
4 or more bedrooms19%

Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Belmore, Charville, Colham & Cowley, Eastcote, Harefield Village, Hayes Town, Heathrow Villages, Hillingdon East, Hillingdon West, Ickenham & South Harefield, Northwood, Northwood Hills, Pinkwell, Ruislip, Ruislip Manor, South Ruislip, Uxbridge, West Drayton, Wood End, Yeading, Yiewsley.

Claymation: a homeowner looking up at a boiler flue on the outside wall of her house

A new boiler in Hillingdon: what is different here

Hillingdon has 31 conservation areas, from old village centres such as Ruislip Village (designated in 1969, one of the borough's first) and Harmondsworth Village (1970) to planned estates and canal-side groups. In them some permitted development rights are restricted, so the council says planning permission is likely to be needed to alter a building.

Hillingdon's Article 4 directions are borough-wide rather than street by street: since 22 September 2014 a single-storey rear extension going more than 4 metres beyond the original rear wall needs planning permission anywhere in the borough, and none of them mentions boiler flues.

Parts of the borough grew as Metroland after the Metropolitan Line reached Ruislip in 1904. The Great Barn at Harmondsworth, built in 1426 to 1427, is listed Grade I.

Flues, conservation areas and listed homes

In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.

On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.

Planning questions: Hillingdon Council: planning and building control.

Sources: Hillingdon Council: conservation areas · Hillingdon Council: Article 4 directions · Hillingdon Council: Ruislip Village conservation area appraisal (2010) · Historic England list entry 1194332: The Great Barn, Harmondsworth · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)

Neighbourhoods we cover in Hillingdon

Postcodes: HA4 HA6 TW6 UB3 UB4 UB7 UB8 UB9 UB10 UB11

How QuoteMy works

  1. Claymation: a homeowner with a cup of tea, checking her guide price on her phone
    See your price

    Answer a few questions about your home and see a guide price in about 60 seconds.

  2. Claymation: a white cat beside a phone that says You've been matched
    Ask for quotes if you want them

    Your details stay with us until you ask.

  3. Claymation: an engineer showing a homeowner his Gas Safe ID card at her kitchen table
    A checked installer calls

    A QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.

Questions

Do I need planning permission for a new boiler flue in Hillingdon?

Not for a like for like swap through the existing flue. In one of Hillingdon's 31 conservation areas some permitted development rights are restricted, so a new flue on the front of the house, or on a side wall facing the road, needs planning permission. A listed building can need listed building consent. Hillingdon's Article 4 directions cover rear extensions and shared houses, not flues. Check with Hillingdon Council before work starts.

How much does a new boiler cost in Hillingdon?

On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.

Who will contact me?

Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.

Does the installer have to be Gas Safe registered?

Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.