QuoteMy Approved installers in Kingston upon Thames
Every one has had their Gas Safe registration and insurance checked by us.
What a new boiler costs in Kingston upon Thames
Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.
| Job | From | Up to |
|---|---|---|
Replace a combi with a new combiFrom the Baxi 400 Combi | £2,350 | £4,000 |
Replace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat | £2,800 | £3,100 |
Switch from a tank system to a combiFrom the Baxi 400 Combi | £3,650 | £5,300 |
Replace a back boiler with a combiFrom the Baxi 400 Combi | £4,050 | £5,700 |
Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.
See the price for my home
Homes in Kingston upon Thames
Most homes in Kingston upon Thames heat with mains gas, so the usual job here is a like for like gas boiler replacement.
With 39% of homes being flats, compact combi boilers are common: they need no tank and fit a kitchen cupboard.
| Homes | 61,921 |
|---|---|
| Heated by mains gas | 78% |
| Electric heating only | 11% |
| Oil | 0% |
| Semi-detached | 32% |
| Terraced | 16% |
| Detached | 13% |
| Flats | 39% |
| 1 or 2 bedrooms | 42% |
| 3 bedrooms | 32% |
| 4 or more bedrooms | 26% |
Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Alexandra, Berrylands, Canbury Gardens, Coombe Hill, Coombe Vale, Green Lane & St James, Hook & Chessington North, King George's & Sunray, Kingston Gate, Kingston Town, Motspur Park & Old Malden East, New Malden Village, Norbiton, Old Malden, St Mark's & Seething Wells, Surbiton Hill, Tolworth, Tudor.

A new boiler in Kingston upon Thames: what is different here
Kingston has 26 conservation areas covering 9.4% of the borough and around 10,000 addresses, listed by the council in the order they were designated, from 1971 to 2004. Kingston Old Town, around Market Place, was designated in March 1971 and Surbiton Town Centre in June 1991.
The council's conservation area guidance says like for like replacement of building elements will generally not need planning permission, but lists erecting chimneys, flues or pipes on any front or side elevation, or facing a highway, among the permitted development rights restricted in a conservation area. Kingston's three Article 4 directions cover fencing at the Seething Wells filter beds, the change of commercial buildings to homes in 39 areas, and the demolition of North Lodge and South Lodge; none of them covers a flue on a house.
Kingston became a recognised town in the late 12th century when Kingston Bridge was first formed across the Thames, and Surbiton grew as a railway new town after its station moved to the present site in 1838: by 1865 Victoria Road, Claremont Road and the north side of Brighton Road were lined with terraced and semi-detached houses. The Church of All Saints, mostly 14th and 15th century, is listed Grade I, as is Clattern Bridge.
Flues, conservation areas and listed homes
In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.
On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.
Planning questions: Kingston Council: check if you need planning permission.
Sources: Kingston Council: conservation areas in Kingston upon Thames (the 26 areas) · Kingston Council: conservation area general guidance (2025) · Kingston Council: Kingston Old Town conservation area · Kingston Council: Surbiton Town Centre conservation area · Kingston Council: Article 4 directions · Historic England list entry 1358437: Church of All Saints, Kingston upon Thames · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)
Neighbourhoods we cover in Kingston upon Thames
Alexandra · Berrylands · Canbury Gardens · Coombe Hill · Coombe Vale · Green Lane & St James · Hook & Chessington North · King George's & Sunray · Kingston Gate · Kingston Town · Motspur Park & Old Malden East · New Malden Village · Norbiton · Old Malden · St Mark's & Seething Wells · Surbiton Hill · Tolworth · Tudor
Postcodes: KT1 KT2 KT3 KT5 KT6
How QuoteMy works
See your priceAnswer a few questions about your home and see a guide price in about 60 seconds.
Ask for quotes if you want themYour details stay with us until you ask.
A checked installer callsA QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.
What a new boiler costs · Combi or system? · Checking a Gas Safe engineer
Questions
Do I need planning permission for a new boiler flue in Kingston upon Thames?
Not for a like for like swap through the existing flue. Kingston's guidance says like for like replacement of building elements will generally not need planning permission, but in one of the borough's 26 conservation areas erecting chimneys, flues or pipes on any front or side elevation, or facing a highway, is not permitted development, so a new flue there needs planning permission; the council encourages fixtures at the rear, below the eaves, where they are not visible from the street. On a listed building a new flue needs listed building consent: works affecting a listed building's special interest need consent in addition to any planning permission, and Kingston says it is a criminal offence to do such works without it. Check with Kingston Council before work starts.
How much does a new boiler cost in Kingston upon Thames?
On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.
Who will contact me?
Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.
Does the installer have to be Gas Safe registered?
Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.


