QuoteMy Approved installers in Luton
Every one has had their Gas Safe registration and insurance checked by us.
What a new boiler costs in Luton
Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.
| Job | From | Up to |
|---|---|---|
Replace a combi with a new combiFrom the Baxi 400 Combi | £2,350 | £4,000 |
Replace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat | £2,800 | £3,100 |
Switch from a tank system to a combiFrom the Baxi 400 Combi | £3,650 | £5,300 |
Replace a back boiler with a combiFrom the Baxi 400 Combi | £4,050 | £5,700 |
Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.
See the price for my home
Homes in Luton
Most homes in Luton heat with mains gas, so the usual job here is a like for like gas boiler replacement.
The most common homes here are semi-detached (39%), then flats (26%).
Most homes here have two or three bedrooms (68%), the size a combi usually suits; with two bathrooms or more, a system boiler and a hot water cylinder often works better.
| Homes | 69,664 |
|---|---|
| Heated by mains gas | 74% |
| Electric heating only | 12% |
| Oil | 0% |
| Semi-detached | 39% |
| Terraced | 22% |
| Detached | 12% |
| Flats | 26% |
| 1 or 2 bedrooms | 41% |
| 3 bedrooms | 43% |
| 4 or more bedrooms | 16% |
Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Barnfield, Biscot, Bramingham, Challney, Dallow, Farley, High Town, Leagrave, Lewsey, Northwell, Round Green, Saints, South, Stopsley, Sundon Park, Wigmore.

A new boiler in Luton: what is different here
Luton has five conservation areas: the town centre, Plaiters' Lea (the Hat District) and High Town Road, the core of Luton's earliest suburb, plus the residential Rothesay area, designated in 2003, and Luton South, designated in 2010. Plaiters' Lea was established in 1991, and the council counts 116 nationally listed buildings in the town.
The Luton Town Centre and surrounds Article 4 direction, in force since 6 October 2023 and covering parts of Bury Park, High Town, Rothesay, New Town and Park Town, withdraws only the Class MA right to turn commercial buildings into homes without planning permission. In a conservation area the council says you need planning permission for some changes that would normally be permitted, including alterations to roofs, cladding a building and inserting dormer windows, and that its list is not exhaustive.
Luton grew with the hat trade: in 1821 it was a small town of 2,986 people and by 1861 it had more than 15,000, and the council describes High Town as more than a Victorian high street, with two hundred years of brewing and hat industry history. The Parish Church of St Mary is listed Grade I, listed on 10 September 1954.
Flues, conservation areas and listed homes
In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.
On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.
Planning questions: Luton Council: check if you need planning permission.
Sources: Luton Council: conservation areas · Luton Council: conservation areas, planning advice and guidance leaflet (June 2020) · Luton Council: current Article 4 directions · Luton Council: Curating Luton, the town-wide heritage strategy 2021 to 2031 · Historic England list entry 1114615: Parish Church of St Mary, Luton · Planning Portal: flue, chimney or soil and vent pipe, planning permission · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)
Neighbourhoods we cover in Luton
Barnfield · Biscot · Bramingham · Challney · Dallow · Farley · High Town · Leagrave · Lewsey · Northwell · Round Green · Saints · South · Stopsley · Sundon Park · Wigmore
Postcodes: LU1 LU2 LU3 LU4
How QuoteMy works
See your priceAnswer a few questions about your home and see a guide price in about 60 seconds.
Ask for quotes if you want themYour details stay with us until you ask.
A checked installer callsA QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.
What a new boiler costs · Combi or system? · Checking a Gas Safe engineer
Questions
Do I need planning permission for a new boiler flue in Luton?
Not for a like for like swap through the existing flue. Luton has no specific flue wording, so the general rule applies: in the town centre, Plaiters' Lea, High Town Road, Rothesay or Luton South conservation areas a new flue on the front of the house, or on a side wall facing the road, needs planning permission, and the council says its list of changes needing permission in a conservation area is not exhaustive. On a listed building a new flue needs listed building consent: Luton says it is a criminal offence to carry out works to a listed building without it, though regular maintenance and like for like repairs do not need consent. Check with Luton Council before work starts.
How much does a new boiler cost in Luton?
On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.
Who will contact me?
Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.
Does the installer have to be Gas Safe registered?
Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.


