QuoteMy Approved installers in Milton Keynes
Every one has had their Gas Safe registration and insurance checked by us.
What a new boiler costs in Milton Keynes
Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.
| Job | From | Up to |
|---|---|---|
Replace a combi with a new combiFrom the Baxi 400 Combi | £2,350 | £4,000 |
Replace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat | £2,800 | £3,100 |
Switch from a tank system to a combiFrom the Baxi 400 Combi | £3,650 | £5,300 |
Replace a back boiler with a combiFrom the Baxi 400 Combi | £4,050 | £5,700 |
Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.
See the price for my home
Homes in Milton Keynes
Most homes in Milton Keynes heat with mains gas, so the usual job here is a like for like gas boiler replacement.
The most common homes here are terraced (31%), then flats (27%).
Most homes here have two or three bedrooms (59%), the size a combi usually suits; with two bathrooms or more, a system boiler and a hot water cylinder often works better.
| Homes | 17,994 |
|---|---|
| Heated by mains gas | 71% |
| Electric heating only | 13% |
| Oil | 0% |
| Semi-detached | 22% |
| Terraced | 31% |
| Detached | 20% |
| Flats | 27% |
| 1 or 2 bedrooms | 44% |
| 3 bedrooms | 33% |
| 4 or more bedrooms | 22% |
Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Central Milton Keynes, Tattenhoe, Woughton & Fishermead.

A new boiler in Milton Keynes: what is different here
Milton Keynes has 27 conservation areas. Stony Stratford was first designated on 6 August 1975 and re-designated on 24 March 2020, Wolverton was first designated in 2001 and re-designated in April 2009, and the city council says permitted development rights are more restricted in conservation areas and on listed buildings, so you are more likely to need planning permission and may also need listed building consent.
An Article 4(2) direction has applied in the Wolverton conservation area since July 2003: changes to windows, doors, roof coverings and chimneys, a front porch, front boundary walls and fences, and painting unpainted brick or stone need planning permission where the front or side of the house looks onto a public road. The council's Article 4 page says every house in the area is affected, but only for extensions or alterations to elevations fronting a road (including side elevations on corner properties, and painting), hard surfaces, walls and satellite dishes to the front.
Milton Keynes was designated a New Town on 23 January 1967 around the existing towns of Bletchley, Wolverton and Stony Stratford: the grid roads define grid squares of roughly 1 km, filled from the early 1970s with Development Corporation rental estates such as Fullers Slade (1971 to 1973) and Netherfield (1972 to 1977), while Wolverton keeps its late nineteenth and early twentieth century railway works terraces. Bletchley Park House, the 1860 mansion at Bletchley Park, is listed Grade II.
Flues, conservation areas and listed homes
In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.
On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.
Planning questions: Milton Keynes City Council: do I need planning permission?.
Sources: Milton Keynes City Council: conservation areas in Milton Keynes · Milton Keynes City Council: Article 4 directions in Milton Keynes · Milton Keynes City Council: Wolverton conservation area review (April 2009) · Milton Keynes City Council: Milton Keynes New Town heritage register, statement of significance (2017) · Historic England list entry 1125409: Bletchley Park House · Planning Portal: flue, chimney or soil and vent pipe, planning permission · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)
Neighbourhoods we cover in Milton Keynes
Central Milton Keynes · Tattenhoe · Woughton & Fishermead
Postcodes: MK4 MK5 MK6 MK7 MK10
How QuoteMy works
See your priceAnswer a few questions about your home and see a guide price in about 60 seconds.
Ask for quotes if you want themYour details stay with us until you ask.
A checked installer callsA QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.
What a new boiler costs · Combi or system? · Checking a Gas Safe engineer
Questions
Do I need planning permission for a new boiler flue in Milton Keynes?
Not for a like for like swap through the existing flue. Milton Keynes City Council says permitted development rights are more restricted in conservation areas and on listed buildings, so in Stony Stratford, Wolverton or any of the city's 27 conservation areas a new flue on the front of the house, or on a side wall facing the road, needs planning permission, and in Wolverton the Article 4(2) direction already brings alterations to any elevation facing a road under planning control. On a listed building a new flue needs listed building consent: the council says consent is required for any work that affects the character of the building, inside or out. Check with Milton Keynes City Council before work starts.
How much does a new boiler cost in Milton Keynes?
On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.
Who will contact me?
Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.
Does the installer have to be Gas Safe registered?
Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.


