Boiler replacement in Rayleigh

A fair price from an installer we have checked. See the price for your home in about 60 seconds.

Get my guide price

Free, 60 seconds, no obligation.

Claymation: a homeowner with a cup of tea and her white cat, beside an engineer giving a thumbs up in front of her new boiler

QuoteMy Approved installers in Rayleigh

Every one has had their Gas Safe registration and insurance checked by us.

What a new boiler costs in Rayleigh

Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.

JobFromUp to
Baxi 400 Combi boiler, from £2,350 fittedReplace a combi with a new combiFrom the Baxi 400 Combi
£2,350£4,000
Ideal Logic+ Heat boiler, from £2,800 fittedReplace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat
£2,800£3,100
Baxi 400 Combi boiler, from £3,650 fittedSwitch from a tank system to a combiFrom the Baxi 400 Combi
£3,650£5,300
Baxi 400 Combi boiler, from £4,050 fittedReplace a back boiler with a combiFrom the Baxi 400 Combi
£4,050£5,700

Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.

See the price for my home
Claymation: a van pulling up outside a brick house, the homeowner waving from her front door

Homes in Rayleigh

Most homes in Rayleigh heat with mains gas, so the usual job here is a like for like gas boiler replacement.

The most common homes here are semi-detached (49%), then detached (29%).

Most homes here have two or three bedrooms (66%), the size a combi usually suits; with two bathrooms or more, a system boiler and a hot water cylinder often works better.

Homes8,406
Heated by mains gas84%
Electric heating only6%
Oil0%
Semi-detached49%
Terraced8%
Detached29%
Flats14%
1 or 2 bedrooms34%
3 bedrooms40%
4 or more bedrooms26%

Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Lodge, Sweyne Park and Grange, Wheatley.

Claymation: a homeowner looking up at a boiler flue on the outside wall of her house

A new boiler in Rayleigh: what is different here

Rayleigh town centre has been a conservation area since November 1969, one of ten in Rochford District, with 24 listed buildings inside it.

Since 11 January 2010 an Article 4(2) direction has applied in the Rayleigh conservation area: alterations, painting, gates, fences and walls on a side of a house that faces the road need planning permission, though the council says like for like replacements and repairs are unlikely to.

Rayleigh Windmill on Bellingham Lane, an early 19th century tower mill, is listed Grade II. The town grew fast once the railway arrived in 1889, and much of the High Street was rebuilt in the 1950s and 1960s.

Flues, conservation areas and listed homes

In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.

On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.

Planning questions: Rochford District Council: apply for planning permission.

Sources: Rochford District Council: conservation areas and the Article 4(2) directions · Rochford District Council: Rayleigh conservation area appraisal and management plan (2007) · Rochford District Council: planning FAQs · Historic England list entry 1147890: Rayleigh Windmill · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)

Neighbourhoods we cover in Rayleigh

Postcodes: SS6

How QuoteMy works

  1. Claymation: a homeowner with a cup of tea, checking her guide price on her phone
    See your price

    Answer a few questions about your home and see a guide price in about 60 seconds.

  2. Claymation: a white cat beside a phone that says You've been matched
    Ask for quotes if you want them

    Your details stay with us until you ask.

  3. Claymation: an engineer showing a homeowner his Gas Safe ID card at her kitchen table
    A checked installer calls

    A QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.

Questions

Do I need planning permission for a new boiler flue in Rayleigh?

Not for a like for like swap through the existing flue. In the Rayleigh conservation area, a new flue on the front of the house, or on a side wall facing the road, needs planning permission, and the Article 4(2) direction there already removes permitted development for alterations to road-facing sides. On a listed building a new flue needs listed building consent, though Rochford says a replacement boiler in its existing place is unlikely to. Check with Rochford District Council before work starts.

How much does a new boiler cost in Rayleigh?

On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.

Who will contact me?

Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.

Does the installer have to be Gas Safe registered?

Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.