QuoteMy Approved installers in Welwyn Garden City
Every one has had their Gas Safe registration and insurance checked by us.
What a new boiler costs in Welwyn Garden City
Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.
| Job | From | Up to |
|---|---|---|
Replace a combi with a new combiFrom the Baxi 400 Combi | £2,350 | £4,000 |
Replace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat | £2,800 | £3,100 |
Switch from a tank system to a combiFrom the Baxi 400 Combi | £3,650 | £5,300 |
Replace a back boiler with a combiFrom the Baxi 400 Combi | £4,050 | £5,700 |
Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.
See the price for my home
Homes in Welwyn Garden City
Most homes in Welwyn Garden City heat with mains gas, so the usual job here is a like for like gas boiler replacement.
The most common homes here are terraced (40%), then flats (29%).
Most homes here have two or three bedrooms (69%), the size a combi usually suits; with two bathrooms or more, a system boiler and a hot water cylinder often works better.
| Homes | 15,170 |
|---|---|
| Heated by mains gas | 78% |
| Electric heating only | 11% |
| Oil | 0% |
| Semi-detached | 24% |
| Terraced | 40% |
| Detached | 7% |
| Flats | 29% |
| 1 or 2 bedrooms | 41% |
| 3 bedrooms | 45% |
| 4 or more bedrooms | 14% |
Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Haldens, Handside, Hollybush, Howlands, Peartree.

A new boiler in Welwyn Garden City: what is different here
Welwyn Hatfield has ten conservation areas, two of them named for Welwyn Garden City: the town centre and residential areas to the west, and the Beehive area. The main Welwyn Garden City conservation area dates from October 1968, and further areas were added to it on 4 September 2007.
Most of the town is also in the Estate Management Scheme, a control under the Leasehold Reform Act 1967 that is in addition to planning permission and needs the council's consent for most alterations to the outside of a home. Its roof policy covers flues and new chimneys: consent is only granted where they sit on the rear or side roof slope and are sited to minimise the effect on the building's appearance.
Welwyn Garden City was founded by Ebenezer Howard in 1920 and designated a New Town on 20 May 1948, with the Development Corporation building much of its housing in the 1950s, mainly east of the railway line. The former Shredded Wheat factory of 1925 on Bridge Road, by Louis de Soissons, who drew the town's 1920 master plan, is listed Grade II.
Flues, conservation areas and listed homes
In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.
On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.
Planning questions: Welwyn Hatfield Borough Council: planning consent for altering your home.
Sources: Welwyn Hatfield Borough Council: planning considerations for conservation areas (the ten areas) · Welwyn Hatfield Borough Council: Welwyn Garden City conservation area appraisal · Welwyn Hatfield Borough Council: Estate Management Scheme policies (roof alterations) · Welwyn Hatfield Borough Council: Estate Management Scheme design guide, chimneys and flues · TCPA: Welwyn Garden City New Town profile · Historic England list entry 1101084: The Nabisco Shredded Wheat Factory · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)
Neighbourhoods we cover in Welwyn Garden City
Haldens · Handside · Hollybush · Howlands · Peartree
Postcodes: AL7 AL8
How QuoteMy works
See your priceAnswer a few questions about your home and see a guide price in about 60 seconds.
Ask for quotes if you want themYour details stay with us until you ask.
A checked installer callsA QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.
What a new boiler costs · Combi or system? · Checking a Gas Safe engineer
Questions
Do I need planning permission for a new boiler flue in Welwyn Garden City?
Not for a like for like swap through the existing flue. In the Welwyn Garden City conservation area a new flue on the front of the house, or on a side wall facing the road, needs planning permission. Across most of the town the Estate Management Scheme is a separate consent, in addition to planning permission: the council only grants it for flues and new chimneys on a rear or side roof slope, sited to minimise the effect on the building's appearance, and its design guide says metal flues may be acceptable where they are not visible from public vantage points, no more than 1 m high and finished black. On a listed building a new flue needs listed building consent. Check with Welwyn Hatfield Borough Council before work starts.
How much does a new boiler cost in Welwyn Garden City?
On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.
Who will contact me?
Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.
Does the installer have to be Gas Safe registered?
Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.


