QuoteMy Approved installers in Camden
Every one has had their Gas Safe registration and insurance checked by us.
What a new boiler costs in Camden
Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.
| Job | From | Up to |
|---|---|---|
Replace a combi with a new combiFrom the Baxi 400 Combi | £2,350 | £4,000 |
Replace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat | £2,800 | £3,100 |
Switch from a tank system to a combiFrom the Baxi 400 Combi | £3,650 | £5,300 |
Replace a back boiler with a combiFrom the Baxi 400 Combi | £4,050 | £5,700 |
Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.
See the price for my home
Homes in Camden
Around 63% of homes in Camden are on mains gas; the rest use other fuels, so check your fuel before comparing prices.
With 87% of homes being flats, compact combi boilers are common: they need no tank and fit a kitchen cupboard.
| Homes | 92,756 |
|---|---|
| Heated by mains gas | 63% |
| Electric heating only | 13% |
| Oil | 0% |
| Semi-detached | 4% |
| Terraced | 8% |
| Detached | 2% |
| Flats | 87% |
| 1 or 2 bedrooms | 68% |
| 3 bedrooms | 20% |
| 4 or more bedrooms | 12% |
Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Belsize, Bloomsbury, Camden Square, Camden Town, Fortune Green, Frognal, Gospel Oak, Hampstead Town, Haverstock, Highgate, Holborn & Covent Garden, Kentish Town North, Kentish Town South, Kilburn, King's Cross, Primrose Hill, Regent's Park, South Hampstead, St Pancras & Somers Town, West Hampstead.

A new boiler in Camden: what is different here
Camden has 40 conservation areas covering about half the borough, and more than 5,600 listed buildings, from the 11th century St Pancras Old Church to the 1970s Alexandra Road Estate. Camden Town conservation area was designated on 11 November 1986 and extended in 1997.
Article 4(1) directions in the Belsize, Hampstead, Fitzjohns and Netherhall, South Hampstead and Redington and Frognal conservation areas remove permitted development rights from the fronts of houses and flats and the sides that face the street, with the latest adopted on 9 June 2026. In Belsize, installing, altering or replacing a chimney, flue or soil and vent pipe that would be visible from the road needs planning permission, and the council says new services should be sited so they are not visible from the road.
Camden Town's residential streets of stock brick and stucco terraces were laid out between 1820 and 1850, with speculative building taking off once the railways arrived in the 1830s. St Pancras Old Church on Pancras Road, with an 11th century core, is listed Grade II*.
Flues, conservation areas and listed homes
In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.
On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.
Planning questions: Camden Council: check if you need planning permission.
Sources: Camden Council: conservation areas · Camden Council: Article 4 directions, heritage and conservation · Camden Council: Belsize conservation area Article 4(1) direction fact sheet (June 2026) · Camden Council: Camden Town conservation area appraisal and management plan (2007) · Historic England list entry 1113246: Old Church of St Pancras · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)
Neighbourhoods we cover in Camden
Belsize · Bloomsbury · Camden Square · Camden Town · Fortune Green · Frognal · Gospel Oak · Hampstead Town · Haverstock · Highgate · Holborn & Covent Garden · Kentish Town North · Kentish Town South · Kilburn · King's Cross · Primrose Hill · Regent's Park · South Hampstead · St Pancras & Somers Town · West Hampstead
Postcodes: EC1N N1C NW1 NW1W NW3 NW5 NW6 W1A W1T WC1A WC1B WC1E WC1H WC1N WC1R WC1V WC1X WC2A WC2B WC2H
How QuoteMy works
See your priceAnswer a few questions about your home and see a guide price in about 60 seconds.
Ask for quotes if you want themYour details stay with us until you ask.
A checked installer callsA QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.
What a new boiler costs · Combi or system? · Checking a Gas Safe engineer
Questions
Do I need planning permission for a new boiler flue in Camden?
Not for a like for like swap through the existing flue. Camden says you will usually need planning permission to make alterations to a property in a conservation area, and in Belsize and Hampstead, where Article 4(1) directions apply, a new flue on the front elevation, or on a side that fronts the street, needs planning permission and will be resisted: the council asks for flues on the side or rear so the public face of the building stays untouched. On a listed building, like for like repairs that match the original do not need listed building consent, but adding new service pipes, flues or vents does. Check with Camden Council before work starts.
How much does a new boiler cost in Camden?
On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.
Who will contact me?
Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.
Does the installer have to be Gas Safe registered?
Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.


