QuoteMy Approved installers in City of Westminster
Every one has had their Gas Safe registration and insurance checked by us.
What a new boiler costs in City of Westminster
Fitted prices from our guide price for a 3-bedroom home on mains gas, with the boiler staying in the kitchen. Every price includes taking your old boiler away, fitting the new boiler and flue, a magnetic filter with the system cleaned and protected, and the guarantee registered for you.
| Job | From | Up to |
|---|---|---|
Replace a combi with a new combiFrom the Baxi 400 Combi | £2,350 | £4,000 |
Replace a system or regular boiler, keeping the tankFrom the Ideal Logic+ Heat | £2,800 | £3,100 |
Switch from a tank system to a combiFrom the Baxi 400 Combi | £3,650 | £5,300 |
Replace a back boiler with a combiFrom the Baxi 400 Combi | £4,050 | £5,700 |
Each "from" price is the boiler shown. Moving the boiler, a new flue or smart controls add to it; your guide price shows exactly what applies to your home.
See the price for my home
Homes in City of Westminster
Around 56% of homes in City of Westminster are on mains gas; the rest use other fuels, so check your fuel before comparing prices.
19% of homes rely on electric heating only; a gas boiler needs a gas supply first.
With 90% of homes being flats, compact combi boilers are common: they need no tank and fit a kitchen cupboard.
| Homes | 94,815 |
|---|---|
| Heated by mains gas | 56% |
| Electric heating only | 19% |
| Oil | 0% |
| Semi-detached | 2% |
| Terraced | 7% |
| Detached | 1% |
| Flats | 90% |
| 1 or 2 bedrooms | 72% |
| 3 bedrooms | 19% |
| 4 or more bedrooms | 9% |
Source: ONS, Census 2021 (central heating; accommodation type; number of bedrooms), for the wards of Abbey Road, Bayswater, Church Street, Harrow Road, Hyde Park, Knightsbridge & Belgravia, Lancaster Gate, Little Venice, Maida Vale, Marylebone, Pimlico North, Pimlico South, Queen's Park, Regent's Park, St James's, Vincent Square, West End, Westbourne.

A new boiler in City of Westminster: what is different here
Westminster has 56 conservation areas covering over 76% of the city, from Georgian and Victorian terraces to post-war estates, and the national list includes around 11,000 buildings and other structures here. Bayswater was first designated in 1967, Belgravia and Pimlico in 1968.
Flats do not benefit from permitted development rights in Westminster, and the rights are restricted for buildings in conservation areas and listed buildings. An Article 4 direction has removed permitted development for basements across the whole city since 31 July 2016, and directions in eight conservation areas, including the Queen's Park Estate and Sussex Gardens, mean planning permission is required there for specified minor alterations.
The council's conservation area guidance says boiler flue terminals will often require planning permission, and that on a listed building both planning permission and listed building consent are needed. Westminster Abbey is listed Grade I, listed on 24 February 1958.
Flues, conservation areas and listed homes
In a conservation area, a new flue counts as permitted development only if it is not on the front of the house or on a side that faces a road. A flue at the back or side can rise up to one metre above the highest part of the roof. Flats have no such rights, and an Article 4 direction can remove them.
On a listed building, a like for like swap using the existing flue and pipe runs is unlikely to need listed building consent. A new flue on a prominent wall, visible pipework or a boiler in a main room may need it, and doing that work without consent is a criminal offence.
Planning questions: Westminster City Council: find out if you need planning permission.
Sources: Westminster City Council: permitted development rights · Westminster City Council: Article 4 directions in Westminster · Westminster City Council: supplementary planning guidance, development and demolition in conservation areas · Westminster City Council: Westminster's conservation areas, character summaries and overview · Historic England list entry 1291494: Westminster Abbey (The Collegiate Church of St Peter) · Planning Portal: flue, chimney or soil and vent pipe, planning permission · Planning Portal: flues and planning permission · Historic England: listed building consent (Advice Note 16)
Neighbourhoods we cover in City of Westminster
Abbey Road · Bayswater · Church Street · Harrow Road · Hyde Park · Knightsbridge & Belgravia · Lancaster Gate · Little Venice · Maida Vale · Marylebone · Pimlico North · Pimlico South · Queen's Park · Regent's Park · St James's · Vincent Square · West End · Westbourne
Postcodes: NW8 SW1A SW1E SW1H SW1P SW1V SW1W SW1X SW1Y W1B W1C W1D W1F W1G W1H W1J W1K W1S W1U W1W W2 W9 WC2E WC2N WC2R
How QuoteMy works
See your priceAnswer a few questions about your home and see a guide price in about 60 seconds.
Ask for quotes if you want themYour details stay with us until you ask.
A checked installer callsA QuoteMy Approved installer calls to check the details: every one is Gas Safe registered, insured and checked by us.
What a new boiler costs · Combi or system? · Checking a Gas Safe engineer
Questions
Do I need planning permission for a new boiler flue in Westminster?
Not for a like for like swap through the existing flue. Westminster's conservation area guidance says boiler flue terminals will often require planning permission, and on a listed building both planning permission and listed building consent. Flats do not benefit from permitted development rights, so a flat cannot rely on the permitted development allowance for flues, which applies to houses only. In a conservation area a new flue should not be fitted on the front of the house or on a side wall facing the road without planning permission. Check with Westminster City Council before work starts.
How much does a new boiler cost in City of Westminster?
On our guide price, replacing a combi with a new combi starts from £2,350 fitted, and most fall between £2,350 and £4,000 depending on the boiler. Switching from a tank system to a combi starts from £3,650, because of the extra pipework.
Who will contact me?
Only QuoteMy Approved installers, and only if you ask for quotes after seeing your price. Seeing a price on its own does not pass your details to anyone.
Does the installer have to be Gas Safe registered?
Yes. By law, anyone who fits or works on a gas boiler must be on the Gas Safe Register. We check every installer who does gas work before they are approved.


