How long does it take to fit a new boiler?

Typical times for each kind of job, what happens on the day, how to get ready and the paperwork you should get afterwards.

Get my guide price

Free, 60 seconds, no obligation.

Claymation: a homeowner checking her watch beside a new boiler

Updated 12 Oct 2026

The short answer

Swapping an old boiler for a new one of the same type, in the same place, usually takes one day. Moving the boiler or changing type, such as a system boiler to a combi, usually takes two to three days, and doing both can take three to four.

Typical times for each job

These are typical times from boiler makers, not promises. The installer who looks at your home is the one who can tell you how long your job will take.

  • Like for like swap, same place: usually one day. Ideal puts the work itself at four to six hours, and Viessmann at around seven to eight.
  • Same type of boiler, moved to a new place: usually one to two days, as new gas and water pipes, wiring and a new flue route are needed.
  • Changing type, such as a system or regular boiler to a combi: usually two to three days, as cylinders and loft tanks come out and the pipework changes.
  • Changing type and moving the boiler: usually three to four days.
  • A boiler plus a whole new central heating system, with new pipes and radiators: Ideal suggests one to two weeks.

How long does a like for like boiler replacement take?

A straight swap is the quickest job, because the gas pipe, water pipes and flue opening are already in the right place. Most installers allow a full working day, so your heating and hot water should be back on by the evening.

It can still run longer if the installer finds something that needs putting right first, such as a flue position that no longer meets the rules, or a heating system full of sludge that needs a thorough clean.

How long does a system boiler to combi conversion take?

Usually two to three days. The hot water cylinder and any tanks in the loft are taken out, the pipework is changed so the new combi can take water straight from the mains, and the old pipes to the cylinder are capped off or removed.

If the boiler is moving at the same time, for example from an airing cupboard to the kitchen, allow three to four days. Ask the installer how they will keep you going if the job runs over more than one night.

Claymation: a van pulling up outside a brick house, the homeowner waving from her front door

What happens on the day

For a straight swap, the installer usually turns off the gas, water and power to the boiler, drains the system and removes the old boiler. The new boiler and flue go in, the system is cleaned and refilled, a filter is often fitted to protect the new boiler, and the boiler is set up and tested.

In England, building regulations changed in October 2022 so that a carbon monoxide alarm should be fitted when a new or replacement gas boiler goes in. If you do not already have one, ask the installer about it when they quote.

Your heating and hot water will be off while the work is going on. For a one day job that is usually just the working day; for a longer job, ask whether you will have heating and hot water overnight.

What can make it take longer

That is why a good installer looks at your home first. If one quote says a job will take a day and another says three, ask each of them what they are including and why.

  • Moving the boiler: new gas and water pipes, wiring and a new flue route.
  • Changing type: cylinders and tanks come out and pipework changes.
  • The flue: if the old position no longer meets the rules, the flue may need to move or be extended.
  • The state of the system: old pipework or a lot of sludge can mean a longer clean.
  • Older homes: floors to lift, solid walls to drill and awkward routes for pipes.
  • New controls: some jobs include new thermostats or smart controls, which take a little extra time to set up.

How to get ready

  • Clear the area around the boiler, and the route to it, so the installer can work and carry things through.
  • If the job involves the loft or an airing cupboard, clear those too.
  • Agree a start date, how many days it should take, and what is included, in writing before work starts.
  • Check the engineer's Gas Safe ID card when they arrive, front and back.
  • If you can choose, a warmer month means going without heating for a day or two matters less.

Paperwork you should get afterwards

A new gas boiler is not finished until the paperwork is done. Ask the installer to show you how to use the boiler and its controls before they leave.

  • A completed commissioning checklist, often called the Benchmark checklist, which records how the boiler was set up.
  • The manufacturer's guarantee registered. Some installers do this for you; check it has been done.
  • In England and Wales, the installer notifies the job through Gas Safe Register within 30 days, and you receive a Building Regulations Compliance Certificate in the post. Gas Safe Register says it posts the certificate within 10 working days of the job being notified. The rules differ in Scotland and Northern Ireland.

See the price for your home

Our guide price takes about 60 seconds. It is free, and you only hear from an installer if you ask for quotes.

Get my guide price

Or read how much a new boiler costs.

Claymation: a tradesperson holding a sign that says Vetted and recommended by QuoteMy

How we check installers

  • Gas Safe. We check each installer's registration number on the Gas Safe Register, and that it belongs to their business.
  • Insured. We see their public liability insurance and note when it runs out. If it lapses, they get no new jobs until it is renewed.
  • Your details stay with us until you ask for quotes, and then go only to installers matched to you.

Questions

Can a new boiler be fitted in a day?

Usually yes, if it is the same type of boiler going in the same place. Moving it or changing type normally takes two days or more.

How long does a combi boiler installation take?

Replacing a combi with a new combi in the same place usually takes one day. Changing to a combi from a system or regular boiler usually takes two to three days.

Will I have heating and hot water while the boiler is fitted?

No, they are off while the work is done. For a one day swap that is usually only during working hours. For longer jobs, ask the installer how they will keep you going overnight.

Do I need to be at home?

Someone needs to let the installer in and be there at the end, when they show you how the new boiler and controls work. Agree this with them before the day.

How long does it take to move a boiler?

Moving a boiler of the same type usually takes one to two days, because new pipes, wiring and a new flue route are needed. Moving it and changing type can take three to four days.

When will I get my Building Regulations certificate?

In England and Wales your installer notifies the work through Gas Safe Register within 30 days, and Gas Safe Register posts the certificate within 10 working days of that. If it does not arrive, ask your installer, or call Gas Safe Register on 0800 408 5500.

Sources